| Input | |
| Capacity | 3000 VA / 2400 W |
| Voltage Range | Low Line Transfer 85VAC/75VAC/65VAC/55VAC±5% or 160VAC/140VAC/120VAC/110VAC±5% (Ambient Temp.<35°C) ( based on load percentage 100%–80% / 80%–70% / 70–60% / 60%–0) |
| Low Line Comeback 95VAC/85VAC/75VAC/65VAC or 175VAC/155VAC/135VAC/125VAC ± 5% (Ambient Temp.<35°C) ( based on load percentage 100%–80% / 80%–70% / 70–60% / 60%–0) |
|
| High Line Transfer 145 VAC ± 5% or 300 VAC ± 5% | |
| High Line Comeback 140 VAC ± 5% or 290 VAC ± 5% | |
| Frequency Range | 40Hz ~ 70 Hz |
| Phase | Single phase with ground |
| Power Factor | ≥0.99 @ nominal voltage (input voltage) |
| Output Capacity | |
| Output voltage | 100/110/115/120/127VAC or 200/208/220/230/240VAC |
| AC Voltage Regulation | ±1% (Batt. Mode) |
| Frequency Range | 47 ~ 53 Hz or 57 ~ 63 Hz (Synchronized Range) |
| Frequency Range (Battery Mode) | 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz |
| Current Crest Ratio | 3:1 |
| Harmonic Distortion | ≤ 3% THD (linear load); ≤6% THD (non-linear load) |
| Transfer Time | AC Mode to Batt. Mode : Zero |
| Inverter to Bypass 4 ms (Typical) | |
| Waveform (Battery Mode) | Pure Sinewave |
| Efficiency | |
| AC Mode | 90% |
| Battery Mode | 88% |
| Battery | |
| Battery Numbers | 6 |
| Charging Current | 1.0A/2.0A/4.0A/6.0A (adjustable through the jumper settings on charger board) |
| Charging Voltage | 82.1 VDC ± 1% |
