| Product Number | DPH-102 |
| Part Number | DPH-102 |
| Products Name | Head-separated Dual Display Digital Pressure Sensor [For gas] |
| Product details | Sensor head |
| CE marking directive compliance | EMC Directive, RoHS Directive |
| Type of pressure | Gauge pressure |
| Rated pressure range | 0 to +1.000 MPa |
| Pressure withstandability | 1.5 MPa |
| Applicable fluid | Air, non-corrosive gas |
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Current consumption | 15 mA or less |
| Analog voltage output | Output voltage : 1 to 5 V (over rated pressure range) |
| Zero point : within 1 V ± 2.5 % F.S. (vacuum / positive pressure type) | |
| within 3 V ± 3 % F.S. (compound pressure type) | |
| Span : within 4 V ± 3.5 % F.S. | |
| Linearity : within ±0.5 % F.S. | |
| Output impedance : 1 kΩ approx. | |
| Protection | IP40 (IEC) |
| Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage : -10 to +60 ℃ +14 to +140 ℉ |
| Ambient humidity | 35 to 85 % RH, Storage : 35 to 85 % RH |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance | 10 to 500 Hz frequency, amplitude 3 mm 0.118 in or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each |
| Shock resistance | 1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions for three times each |
| Temperature characteristics | Over ambient temperature range 0 to +50 ℃ +32 to +122 ℉ : within ±2 % F.S. of detected pressure at +25 ℃ +77 ℉ |
| Pressure port | R1/8 male thread + M5 female thread. |
| Material | Front case : PBT, Rear case : PBT (glass fiber reinforced), Pressure port : Stainless steel (SUS303), O-ring : NBR |
| Pressure element : Silicon diaphragm, PPS | |
| Connecting method | Connector |
| Cable | 0.2 mm2 4-core oil resistant cabtyre cable (Models with “-R” affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable) |
| Cable extension | Extension up to total 10 m 32.808 ft is possible with 0.2 mm2, or more, cable. |
| Weight : Net weight | Head 10 g approx. / Cable 40 g approx. |
| Weight : Gross weight | 80 g approx. |
| Accessories | Connector (e-CON) : 1 pc. |
| Remark | Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +25 ℃ +77 ℉. |
| The sensor head can be used independently. |
