General |
|
| Model | • DGS-F1100-10PS-E |
| Interfaces | • 8 x 10/100/1000BASE-T |
| • 2 x 100/1000 Mbps SFP ports | |
| Port Standards | • IEEE 802.3: Ethernet Media Access Control (MAC) protocol IEEE 802.3i:10BASE-T Ethernet |
| • IEEE 802.3u:100BASE-TX fast Ethernet IEEE 802.3ab:1000BASE-T gigabit Ethernet | |
| • IEEE 802.3z:1000BASE-X gigabit Ethernet fiber） | |
| •IEEE 802.3ad: comply link aggregation standard IEEE 802.3x: flow control | |
| • IEEE 802.1q: VLAN Bridge operation IEEE 802.1d:STP spanning tree IEEE 802.1s: MSTP spanning tree | |
| • IEEE 802.1w: RSTP spanning tree | |
| • IEEE 802.1p: About the traffic priority of the second layer of QoS / Cos protocol (multicast filtering) | |
PoE |
|
| PoE Standards | • IEEE 802.3af/at |
| PoE Capable Ports | • Port 1-8 can support up to 250m @10Mbps with Extend Enable |
| Power Budget | • 96W (30W max. per port) |
Uplink Port Settings |
|
| From Port | • Specifies the start port in the range for Uplink Ports. These are used for connecting the surveillance VLAN with other switches. |
| To Port | • Specifies the end port in the range for Uplink Ports. These are used for connecting the surveillance VLAN with other switches |
| Network Cables | • UTP Cat. 5, Cat. 5e (100 m max.) |
| Duplex Mode | • Full/Half-duplex for 10/100 Mbps |
| • Full duplex for 1000 Mbps | |
Performance |
|
| Switching Capacity | • 20 Gbps |
| Transmission Method | • Store-and-forward |
| MAC Address Table | • 8K entries |
| Maximum 64 Byte Packet Forwarding Rate | • 14.88 Mpps |
LED’s |
|
| Power | ✓ |
| System | ✓ |
Physical/Environmental |
|
| Power Input | • DC:12V 1A |
| Operating Temperature | • 0°C ~ 50°C |
| Storage Temperature | • -40°C to 70°C |
| Operating Humidity | • 10% to 95% relative humidity no condensation |
| Storage Humidity | • 5% to 90% relative humidity no condensation |
| Dimensions (L x W x H) | • 225 x 120 x 35 mm |
